Shopping Cart
0 items
Manufacturers
Useful links

PAYMENT
Solution Graphics
Banking Transfer
pagonline

BREATHABLE WATER-MOULD CLEANER for INTERIOR WHITE COMBAT 999 EW

Model: VERSNM/PTRTRSAMFCMB999
  • Price: € 37.20
  • Shipping costs: € 25.00
    • PACKAGING FORMAT :
    • Handling Time: 2 days
    • Object location: Map
Attention!
Shipments to all disadvantaged places such as Capri, Anacapri, Ischia, Elba, Lampedusa,
lagoon and small islands are subject to a surcharge on the cost of shipping requested by courier
by €20.00
. At the time of purchase, we will ask for it, please check in advance.


COMBAT 999 EW
BREATHABLE WATER-MOULD CLEANER FOR INTERIOR DESIGN – HIGH WHITENESS


COMBAT 999 EW is a breathable water particularly suitable for indoors
subject to high humidity in the air and prone to the formation of mould.
White opaque finishes especially and produces uniform.
Thanks to its long, the Sanitizer product preserves the original aspect
surfaces and improves living comfort.
COMBAT 999 EW also has excellent coverage, high breathability
sippy, smooth power and brushability and détente.

DIRECTIONS OF USE
Applicable on:
-New and old Plasters based on hydraulic binders.
-Concrete surfaces.
-Plaster and plasterboard Surfaces.
-Old paints and coatings organic in nature or
mineral, absorbent dry vacuums, and cohesive.
-Various kinds of mineral Conglomerates provided sanitary napkins.
The surfaces must be properly prepared according to the
paragraph "PREPARING a MEDIUM".
Do not use on fresh media tends to be
alkaline, wait for an appropriate time of maturation,
generally four weeks.

TECHNICAL CHARACTERISTICS
-Nature of the binder: vinyl resins in water dispersion.
-UNI EN ISO 2811-1 density: 1.74 ± 0.05 kg/l
-Packaging: 74000 Viscosities UNI 8902 ± 10000
CPS at 30° C (rotational viscometer Brookfield)
-UNI EN ISO 2813 Brilliance: 5-10, Matt
-* 0 = no development Effectiveness UNI 9805-mould:
-* A protection anti-fungal UNI EN 15457:0 = None
development
-Drying (at 25° C and 65% r.h.): to touch in 30 minutes;
can be painted over after 4 hours.

PREPARATION OF THE SUBSTRATE

Wall surfaces:
-Make sure the substrate is dry and matured. If
necessary to remake or consolidation
with specific products.
-In the presence of mold surface treatment with
detergent 4810222 healing and COMBAT 222 cod.
COMBAT 333 cod. 4810333.
-Remove, brushing or by washing the
any efflorescence and sfoglianti parts of
old paint. Completely eliminate any layers
high lime paints or tempera.
-Remove dust, smog and more, through
brushing.
-Leveling uneven support and treat the holes,
cracks, crevices and hollows with TAMSTUCCO.
Seal the cracks with the proper sealant.
-Sand the fillings and patches with sandpaper.
-Perform any shavings out of plaster with RASAMIX
9450150 or 9440160 or BETOMARC with RASOMARC
9500150 according to the type of support.
-Fissativare with micronized fixative solvent free
ATOM 8840001, or BONDING AGENT 4700006 Fixative
water-based acrylic mural. Plasterboard apply
specific insulation Insulation 4710019 HELPER
Pigmented. Typically on surfaces very chalking, in
presence of small gaps of old paint or paint
deteriorated, use micronized fixative solvent free
Solvent-based insulating AGENT ISOMARC 8840001 or ATOM
4410111.

DIRECTIONS FOR APPLICATION
-Environmental Conditions and support:
Environment temperature: Min 8° C/maximum 35° C
Relative humidity: 75% <
Media temperature: 5° C/Min. Max. 35° C
Humidity of <10% support:
-Tools: brush, roller, spray, airless.
No layers: at least 2 layers.
-Dilution: first layer to 50% with water; layers
After 30-40%.
-In applications with airless dilution varies according
the equipment and the working pressure used.
-The cleaning of tools must be cleaned immediately after use with
water.
-Yield: 9-12 mq/l per coat and refers to
moderately absorbent surfaces. It is appropriate to
determine actual coverage with a preliminary trial on the
specific support.
-Apply COMBAT 999 EW according
as described in the directions for the application.
* (Dilutions of the insulation and the amount to be applied are in
function of surface absorption and range
determined with preliminary tests on specific media –
Consult the technical data sheet).

Attention!
Product specifications are subject to change without notice by the manufacturer for the purpose of
improve its quality. We will try to update them quickly, but this may not
be possible in the immediate future.

button_leftbutton_rightbutton_leftbutton_right